In this article we cover the Athom Mini Relay switch, a fairly small Relay switch for use behind your existing wall switch. These kind of switches are sold by manny companies, mainly based on Tuya firmware for use in a Chinese cloud, which we are...
On we found a shop called Athom that sells hardware specifically for ESPhome, Tasmota, Homekit and WLED. We usually flash hardware ourselves, but since Tuya is now selling hardware with different kinds of MCU’s, it is no longer possible to flash most of these devices...
Introduction The espthings.io ET-AD01 is 4 channel Analog input / 4 channel digital in/out controller. As mentioned in one of our previous blog posts, a design idea is sparked in several ways. In this case the design originated from a question from a friend who...
Some of the esphome 2021.10.0 new features are support for the AirThings Wave Mini (Blutooth low energy sensors), Current Based Covers, Daly BMS, Modbus controller, Tuya based Covers and more… Also a huge effort has been put into reorganising, restructuring and rewriting a whole lot...
Sonoff just introduced the , a brand new 2-gang smart (Wifi) wall switch combined with a 3.5″ HMI touchscreen with a resolution of 480×320 pixels. There are 2 versions available, one for the US market, and one for the EU. Sonoff was kind enough to...
Note: The CSE7761 is now supported by ESPhome! Al little while back we published this article on the new . We mentioned that the only disadvantage was that esphome did not yet support power metering as esphome has no support for the CSE7761 chip used...
Recent Comments